Chapter 4 - Input/Output Settings; Power Up Beeper; Beep On Bel Character; Good Read And Error Indicators - Honeywell Voyager 1200g User Manual

4
Input/Output Settings

Power Up Beeper

The scanner can be programmed to beep when it's powered up. Scan the Off bar code(s) if you don't want a power up beep.
Default = Power Up Beeper On - Scanner.
Power Up Beeper Off -
Scanner

Beep on BEL Character

You may wish to force the scanner to beep upon a command sent from the host. If you scan the following Beep on BEL On bar
code, the scanner will beep every time a BEL character is received from the host. Default = Beep on BEL Off.
*Beep on BEL Off

Good Read and Error Indicators

Beeper – Good Read
The beeper may be programmed On or Off in response to a good read. Turning this option off, only turns off the beeper
response to a good read indication. All error and menu beeps are still audible. Default = Beeper - Good Read On.
Beeper - Good Read Off
* Power Up Beeper On -
Scanner
Beep on BEL On
* Beeper - Good Read On
4 - 1