To change the number of error beeps, scan the following bar code and then scan a digit (1-9) bar code and the
code on the
Programming Chart
LED Indicators
The green and red LEDs can be programmed to be On or Off and at different brightness levels to indicate various scanner
states. Use the following bar codes to program the LED indicators.
LED Settings
Default = For Voyager 1200g - Red LED On with Laser . For Voyager 1202g and 1202g-BF - Red LED On with Laser/Red
LED Blinks when Battery is Low.
Red LED Off
Red LED On with Good Scan
Red LED On with Laser
Green LED On with Laser
5 - 4
inside the back cover of this manual. Default = 1.
Number of Error Beeps/LED Flashes
Save
Green LED Off
Green LED On with Good Scan
Red LED On with Laser/
Red LED Blinks when Battery is Low
Red LED On when CodeGate
Disabled
bar