Function Code Transmit; Communication Check Character - Honeywell Voyager 1200g User Manual

DEC HEX Keyboard Function
135 87
136 88
137 89
138 8A
139 8B
140 8C
141 8D
142 8E
143 8F
144 90
145 91
146 92
147 93
148 94
149 95
150 96
151 97

Function Code Transmit

When this selection is enabled and function codes are contained within the scanned data, the scanner transmits the function
code to the terminal. Charts of these function codes are provided in
scanner is in keyboard wedge mode, the scan code is converted to a key code before it is transmitted. Default = Enable.
* Enable

Communication Check Character

To enhance security, you can specify the transmission type of a check character; either LRC where the calculation starts on the
first transmitted character, LRC where the calculation starts on the second transmitted character, or CRC.
Note: This option adds a check character to the bar code data for all symbologies. If you need to enable or disable check
characters for individual symbologies, see
Scan the following bar code to set the communication check character type. Default = None.
* None
5 - 4
Alternate Extended ASCII Characters (Continued)
DEC HEX Keyboard Function
End
Page Up
Page Down
Right ALT
Right CTRL
Reserved
Reserved
Numeric Keypad Enter
Numeric Keypad /
F1
F2
F3
F4
F5
F6
F7
F8
Symbologies
159 9F Caps Lock
160 A0 Num Lock
161 A1 Left Alt
162 A2 Left Ctrl
163 A3 Left Shift
164 A4 Right Shift
165 A5 Print Screen
166 A6 Tab
167 A7 Shift Tab
168 A8 Enter
169 A9 Esc
170 AA Alt Make
171 AB Alt Break
172 AC Control Make
173 AD Control Break
174 AE Alt Sequence with 1 Character
175 AF Ctrl Sequence with 1 Character
Supported Interface Keys
beginning on page 7-1.
starting on page 8-2. When the
Disable
LRC Starts on 1st Character