Data Format Non-Match Error Tone; Primary/Alternate Data Formats - Honeywell Voyager 1200g User Manual

Data Format Required,
Keep Prefix/Suffix

Data Format Non-Match Error Tone

When a bar code is encountered that doesn't match your required data format, the scanner normally generates an error
tone. However, you may want to continue scanning bar codes without hearing the error tone. If you scan the Data Format
Non-Match Error Tone Off bar code, data that doesn't conform to your data format is not transmitted, and no error tone will
sound. If you wish to hear the error tone when a non-matching bar code is found, scan the Data Format Non-Match Error
Tone On bar code. Default = Data Format Non-Match Error Tone On.
* Data Format Non-Match Error
Tone On

Primary/Alternate Data Formats

You can save up to four data formats, and switch between these formats. Your primary data format is saved under 0. Your other
three formats are saved under 1, 2, and 3. To set your device to use one of these formats, scan one of the following bar codes.
Primary Data Format
Data Format 2
Data Format Required,
Drop Prefix/Suffix
Data Format Non-Match
Error Tone Off
Data Format 1
Data Format 3
6 - 11