Interfunction Delay
An interfunction delay of up to 5000 milliseconds (in 5ms increments) may be placed between the transmission of each
segment of the message string. Scan the following Interfunction Delay bar code, then scan the number of 5ms delays,
and the
Save
bar code using the
To remove this delay, scan the Interfunction Delay bar code, then set the number of delays to 0. Scan the
using the
Programming Chart
Intermessage Delay
An intermessage delay of up to 5000 milliseconds (in 5ms increments) may be placed between each scan transmission.
Scan the following Intermessage Delay bar code, then scan the number of 5ms delays, and the
Programming Chart
inside the back cover of this manual.
To remove this delay, scan the Intermessage Delay bar code, then set the number of delays to 0. Scan the
using the
Programming Chart
5 - 6
Programming Chart
inside the back cover of this manual.
Prefix
Scanned Data
STX
1
HT
2 3 4 5
Interfunction Delays
Interfunction Delay
inside the back cover of this manual.
1st Scan Transmission
Intermessage Delay
Intermessage Delay
inside the back cover of this manual.
Suffix
CR
LF
2nd Scan Transmission
Save
bar code
Save
bar code using the
Save
bar code