Scanner LED Sequences and Meaning
LED Indication
Normal Operation
Red Flash
Green Flash
Red, blinking
Menu Operation
Green Flash
Red, blinking
Base/Access Point LED Sequences and Meaning
The base contains a red LED and the Access Point has a blue LED that
indicate the status of the unit and verifies its communication with the host
system. The base also has a green LED that indicates scanner battery
charge condition.
Red or Blue LED - Host Communication
Red or Blue LED
Off
On continuously
Short blinks in multiple pulses. Occurs
while transferring data to/from the RF
module or the Host port.
(base only, does not apply to Access Point)
Green LED
Off
Slow flash, 1 second on, 1 second off
On continuously
Fast flash, 300 mSec on, 300 mSec off
Beeper Indication
None
1 beep
Razz or error tone
2 beeps
Razz or error tone
Green LED - Scanner Battery
Cause
Battery low
Successful
communication or linking
Failed communication
Successful menu change
Unsuccessful menu
change
Communication Condition
USB suspend
Power on, system idle
Receiving data
Charge Condition
Battery not detected or charge
suspended
Pre-charge and charging
Charge complete
Charge Error
3 - 7