®
Gilbarco
Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Gilbarco terminal. This bar code sets the baud rate to 2400
bps and the data format to 7 data bits, even parity, 2 stop bits. It also adds a carriage return (CR) suffix and programs the follow-
ing prefixes for each symbology:
Note: If you are having unexpected results with this programming code, scan the
page 1-7 first, then scan the programming code above.
Honeywell Bioptic Aux Port Configuration
Scan the following Plug and Play code to program the scanner for a Honeywell bioptic scanner auxiliary port configuration. This
bar code sets the baud rate to 38400 bps and the data format to 8 data bits, no parity, 1 stop bit. Character RTS/CTS with tim-
eout and 232 ACK/NAK are also enabled.
Note: If you are having unexpected results with this programming code, scan the
page 1-7 first, then scan the programming code above.
Datalogic™ Magellan
Scan the following Plug and Play code to program the scanner for a Datalogic Magellan bioptic scanner auxiliary port configura-
tion. This bar code sets the baud rate to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.
Note: If you are having unexpected results with this programming code, scan the
page 1-7 first, then scan the programming code above.
2 - 8
Symbology
UPC-A
UPC-E
EAN-8
EAN-13
Gilbarco Settings
Honeywell Bioptic Settings
©
Bioptic Aux Port Configuration
Datalogic Magellan Bioptic Settings
Prefix
A
E0
FF
F
Resetting the Custom Defaults
Resetting the Custom Defaults
Resetting the Custom Defaults
bar code on
bar code on
bar code on