Preparing For Installation; Warnings - Cisco Catalyst 2950 Hardware Installation Manual

Preparing for Installation

Preparing for Installation

Warnings

Warning
Warning
Warning
Warning
Warning
Catalyst 2950 Desktop Switch Hardware Installation Guide
3-2
This section provides information about these topics:
• Warnings, page 3-2
EMC Regulatory Statements, page 3-4
•
• Installation Guidelines, page 3-7
Verifying Package Contents, page 3-8
•
These warnings are translated into several languages in
Safety Warnings."
This equipment is to be installed and maintained by service personnel only as
defined by AS/NZS 3260 Clause 1.2.14.3 Service Personnel.
This unit is intended for installation in restricted access areas. A restricted
access area can be accessed only through the use of a special tool, lock and
key, or other means of security.
Only trained and qualified personnel should be allowed to install or replace this
equipment.
Read the installation instructions before you connect the system to its power
source.
Unplug the power cord before you work on a system that does not have an on/off
switch.
Chapter 3 Installation
Appendix D, "Translated
78-11157-05