Cisco Catalyst 2950 Hardware Installation Manual page 24

Related Publications
Switch requirements and procedures for initial configurations and software
Note
upgrades tend to change and therefore appear only in the release notes. Before
installing, configuring, or upgrading the switch, refer to the release notes on
Cisco.com for the latest information.
For hardware information about the switch, refer to the Catalyst 2950 Desktop
Switch Hardware Installation Guide (order number DOC-7811157=)
For software information about the switch, refer to these documents:
•
•
•
For information about the Catalyst 2950 Long-Reach Ethernet (LRE) switches,
refer to these documents:
•
•
•
•
For other information about related products, refer to these documents:
•
•
•
•
Catalyst 2950 Desktop Switch Hardware Installation Guide
xxiv
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
(order number DOC-7811380=)
Catalyst 2950 and Catalyst 2955 Switch Command Reference (order number
DOC-7811381=)
Catalyst 2950 and Catalyst 2955 Switch System Message Guide (order
number DOC-7814233=)
Catalyst 2950 Desktop Switch Software Configuration Guide (order number
DOC-7814982=)
Catalyst 2950 Desktop Switch Command Reference (order number
DOC-7814984=)
Catalyst 2950 Desktop Switch System Message Guide (order number
DOC-7814981=)
Release Notes for the Catalyst 2950 LRE Switch (not orderable but available
on Cisco.com)
1000BASE-T Gigabit Interface Converter Installation Notes (not orderable
but is available on Cisco.com)
Catalyst GigaStack Gigabit Interface Converter Hardware Installation Guide
(order number DOC-786460=)
Cisco LRE CPE Hardware Installation Guide (order number
DOC-7811469=)
Cisco RPS 300 Redundant Power System Hardware Installation Guide (order
number DOC-7810372=)
Preface
78-11157-05