Cisco Catalyst 2950 Hardware Installation Manual page 172

Wiring the DC-Input Power Source
Step 6 Repeat Steps 4 and 5 for the remaining three DC-input power source wires.
Figure C-9
Figure C-9
Insert the terminal block plug in the terminal block header on the rear panel of the
Step 7
Catalyst 2950G-24-EI-DC switch or on the front panel of the Catalyst 2950ST-24
LRE 997 switch.
Catalyst 2950G-24-EI-DC switch.
Secure the wires coming in from the terminal block so that they cannot be
Caution
disturbed by casual contact. For example, use tie wraps to secure the wires to the
rack.
Catalyst 2950 Desktop Switch Hardware Installation Guide
C-10
shows the completed wiring of a terminal block plug.
Completed Wiring of Terminal Block Plug
Figure C-10 shows how to insert the terminal block on a
Appendix C Connecting to DC Power
Return
Feed A
Negative
Return
Feed B
Negative
78-11157-05