Installation - Cisco Catalyst 2950 Hardware Installation Manual

Installation

This chapter describes how to install your switch, interpret the power-on self-test
(POST), and connect the switch to other devices. Read these topics, and perform
the procedures in this order:
•
•
•
•
•
•
•
•
•
•
•
•
•
78-11157-05
Preparing for Installation, page 3-2
Verifying Switch Operation, page 3-10
Installing the Switch in a Rack, page 3-10
Installing the Switch on a Table, Shelf, or Desk, page 3-22
Installing the Switch on a Wall, page 3-23
Installing the GBIC Modules, page 3-26
Installing and Removing SFP Modules, page 3-28
Connecting to 10/100 and 10/100/1000 Ports, page 3-32
Connecting to 100BASE-FX and 1000BASE-SX Ports, page 3-36
Connecting to an LRE Port, page 3-38
Connecting to GBIC Module Ports, page 3-44
Connecting to an SFP Module, page 3-49
Where to Go Next, page 3-50
Catalyst 2950 Desktop Switch Hardware Installation Guide
C H A P T E R
3
3-1