Cisco Catalyst 2950 Hardware Installation Manual page 48

Features
Figure 2-1
These are the switch features:
•
Note
Catalyst 2950 Desktop Switch Hardware Installation Guide
2-2
through Figure 2-12
Hardware
– Catalyst 2950-12 switch—12 10/100 Ethernet ports.
Catalyst 2950-24 switch—24 10/100 Ethernet ports.
–
– Catalyst 2950C-24 switch—24 10/100 Ethernet ports and
2 100BASE-FX ports.
– Catalyst 2950G-12-EI—12 10/100 Ethernet ports and 2 GBIC module
slots.
Catalyst 2950G-24-EI—24 10/100 Ethernet ports and 2 GBIC module
–
slots.
Catalyst 2950G-24-EI-DC—24 10/100 Ethernet ports and 2 GBIC
–
module slots with direct current (DC)-input power.
Catalyst 2950G-48-EI—48 10/100 Ethernet ports and 2 GBIC module
–
slots.
Catalyst 2950ST-8 LRE switch—8 LRE ports, 2 10/100/1000 Ethernet
–
ports, and 2 small-form-factor pluggable (SFP) module slots. (Two of the
four uplink ports are active at one time.)
– Catalyst 2950ST-24 LRE switch—24 LRE ports, 2 10/100/1000 Ethernet
ports, and 2 SFP module slots. (Two of the four uplink ports are active at
one time.)
Catalyst 2950ST-24 LRE 997 switch—24 LRE ports, 2 10/100/1000
–
Ethernet ports, and 2 SFP module slots with DC-input power. (Two of the
four uplink ports are active at one time.)
Refer to the Catalyst 2950 LRE switch release notes for a list of supported
SFP modules for the Catalyst 2950 LRE switches.
Catalyst 2950SX-24 switch—24 10/100 Ethernet ports and
–
2 1000BASE-SX ports.
Catalyst 2950T-24 switch—24 10/100 Ethernet ports and 2 10/100/1000
–
Ethernet ports.
show the Catalyst 2950 switches.
Chapter 2 Overview
78-11157-05