Quick Installation - Cisco Catalyst 2950 Hardware Installation Manual

Quick Installation

This chapter provides a quick step-by-step installation and setup procedure for a
standalone switch.
For detailed installation procedures on rack-mounting your switch, connecting to
Note
the Gigabit Ethernet Interface Converter (GBIC) modules, or connecting to the
small form-factor pluggable (SFP) modules, see
product overview information, see
These steps describe how to do a simple installation:
1.
2.
3.
4.
5.
6.
7.
78-11157-05
Taking Out What You Need, page 1-2
Connecting to the Console Port, page 1-3
Starting the Terminal Emulation Software, page 1-4
Connecting to a Power Source, page 1-5
Entering the Initial Configuration Information, page 1-6
Connecting to an Ethernet Port, page 1-10
Accessing the Switch from Your Browser, page 1-11
Catalyst 2950 Desktop Switch Hardware Installation Guide
C H A P T E R
Chapter 3, "Installation."
Chapter 2, "Overview."
1
For
1-1