Cluster Member - Cisco Catalyst 2950 Command Reference Manual

cluster member

Examples
This example shows how to add a switch as member 2 with MAC address 00E0.1E00.2222 and the
password key to a cluster. The command switch adds the candidate to the cluster through VLAN 3.
Switch(config)# cluster member 2 mac-address 00E0.1E00.2222 password key vlan 3
This example shows how to add a switch with MAC address 00E0.1E00.3333 to the cluster. This switch
does not have a password. The command switch selects the next available member number and assigns it
to the switch joining the cluster:
Switch(config)# cluster member mac-address 00E0.1E00.3333
You can verify your settings by entering the show cluster members privileged EXEC command on the
command switch.
Related Commands Command
show cluster
show cluster candidates
show cluster members
Catalyst 2950 Desktop Switch Command Reference
2-30
Description
Displays the cluster status and a summary of the cluster to which the
switch belongs.
Displays a list of candidate switches.
Displays information about the cluster members.
Chapter 2 Cisco IOS Commands
78-11381-05