Show Mvr Members - Cisco Catalyst 2950 Command Reference Manual

show mvr members

show mvr members
Use the show mvr members privileged EXEC command to display all receiver ports that are members
of an IP multicast group.
Syntax Description
ip-address
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.1(6)EA2
Usage Guidelines
The show mvr members command only applies to receiver ports. All source ports are members of all
multicast groups.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show mvr members command:
Switch# show mvr members
MVR Group IP
------------
239.255.0.1
239.255.0.2
239.255.0.3
239.255.0.4
239.255.0.5
239.255.0.6
239.255.0.7
239.255.0.8
239.255.0.9
239.255.0.10
<output truncated>
239.255.0.255
239.255.1.0
Catalyst 2950 Desktop Switch Command Reference
2-194
show mvr members [ip-address] [ | {begin | exclude | include} expression]
(Optional) The IP multicast address. If the address is entered, all receiver
ports that are members of the multicast group appear. If no address is entered,
all members of all Multicast VLAN Registration (MVR) groups are listed. If
a group has no members, the group is listed as Inactive.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was first introduced.
Status
------
ACTIVE
INACTIVE
INACTIVE
INACTIVE
INACTIVE
INACTIVE
INACTIVE
INACTIVE
INACTIVE
INACTIVE
INACTIVE
INACTIVE
Members
-------
Gi0/1(d), Gi0/2(s)
None
None
None
None
None
None
None
None
None
None
None
Chapter 2 Cisco IOS Commands
78-11381-05