Cisco Catalyst 2950 Command Reference Manual page 245

Chapter 2 Cisco IOS Commands
Examples
This is an example of output from the show vlan command.
display.
Switch> show vlan
VLAN Name
---- -------------------------------- --------- -------------------------------
1
2
51
52
100
400
1002 fddi-default
1003 token-ring-default
1004 fddinet-default
1005 trnet-default
VLAN Type
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1
2
51
52
100
400
1002 fddi
1003 tr
1004 fdnet 101004
1005 trnet 101005
Remote SPAN VLANs
------------------------------------------------------------------------------
Primary Secondary Type
------- --------- ----------------- ------------------------------------------
Table 2-16 show vlan Command Output Fields
Field
VLAN
Name
Status
Ports
Type
SAID
MTU
Parent
RingNo
78-11381-05
default
VLAN0002
VLAN0051
VLAN0052
VLAN0100
VLAN0400
SAID MTU
enet 100001 1500
enet 100002 1500
enet 100051 1500
enet 100052 1500
enet 100100 1500
enet 100400 1500
101002 1500
101003 1500
1500
1500
Description
VLAN number.
Name, if configured, of the VLAN.
Status of the VLAN (active or suspend).
Ports that belong to the VLAN.
Media type of the VLAN.
Security association ID value for the VLAN.
Maximum transmission unit size for the VLAN.
Parent VLAN, if one exists.
Ring number for the VLAN, if applicable.
Status Ports
active Fa0/1, Fa0/2, Fa0/5, Fa0/7
Fa0/8, Fa0/9, Fa0/11, Fa0/12
Gi0/1, Gi0/2
active
active
active
suspended Fa0/3
suspended
active
active
active
active
Parent RingNo BridgeNo Stp
- - -
- - -
- - -
- - -
- - -
- - -
- - -
1005 3276 -
- - 1
- - 15
Ports
Catalyst 2950 Desktop Switch Command Reference
Table 2-16 describes each field in the
BrdgMode Trans1 Trans2
- - 1002 1003
- - 0 0
- - 0 0
- - 0 0
- - 0 0
- - 0 0
- - 1 1003
- srb 1 1002
ieee - 0 0
ibm - 0 0
show vlan
2-221