Cisco Catalyst 2950 Command Reference Manual page 133

Chapter 2 Cisco IOS Commands
This example shows how to configure a port as an MVR source port:
Switch(config)# interface fastethernet0/3
Switch(config-if)# mvr type source
This example shows how to return a port to the default setting:
Switch(config)# interface fastethernet0/5
Switch(config-if)# no mvr type receiver
You can verify your settings by entering the show mvr privileged EXEC command.
Related Commands Command
mvr
mvr immediate
mvr vlan group
show mvr
78-11381-05
Description
Enables MVR.
Enables the Immediate-Leave feature on an interface.
Configures a receiver port as a member of an MVR group.
Displays MVR global parameters or port parameters.
Catalyst 2950 Desktop Switch Command Reference
mvr type
2-109