Cisco Catalyst 2950 Command Reference Manual page 48

cluster commander-address
This example shows how to remove a member from the cluster by using the cluster member console:
Switch# configure terminal
Enter configuration commands, one per line.
Switch(config)# no cluster commander-address
You can verify your settings by entering the show cluster privileged EXEC command.
Related Commands Command
show cluster
show running-config
Catalyst 2950 Desktop Switch Command Reference
2-24
End with CNTL/Z.
Description
Displays the cluster status and a summary of the cluster to which the switch
belongs.
Displays the configuration information running on the switch. For syntax
information, select Cisco IOS Configuration Fundamentals Command
Reference for Release 12.1 > Cisco IOS File Management Commands >
Configuration File Commands.
Chapter 2 Cisco IOS Commands
78-11381-05