Spanning-Tree Extend System-Id - Cisco Catalyst 2950 Command Reference Manual

Desktop switch
Hide thumbs Also See for Catalyst 2950:
Table of Contents

Advertisement

Chapter 2 Cisco IOS Commands

spanning-tree extend system-id

Use the spanning-tree extend system-id global configuration command to enable the extended system
ID feature.
Note
Though visible in the command-line help strings, the no version of this command is not supported.
You cannot disable the extended system ID feature.
Syntax Description
This command has no arguments or keywords.
Defaults
The extended system ID is enabled.
Command Modes
Global configuration
Command History
Release
12.1(9)EA1
Usage Guidelines
In Release 12.1(9)EA1 and later, the switches support the 802.1T spanning-tree extensions, and some of
the bits previously used for the switch priority are now used for the extended system ID (VLAN identifier
for the per-VLAN spanning-tree [PVST] or an instance identifier for the multiple spanning tree [MST]).
In earlier releases, the switch priority is a 16-bit value.
The spanning tree uses the extended system ID, the switch priority, and the allocated spanning-tree MAC
address to make the bridge ID unique for each VLAN or multiple spanning-tree instance. With earlier
releases, spanning tree used one MAC address per VLAN to make the bridge ID unique for each VLAN.
Support for the extended system ID affects how you manually configure the root switch, the secondary
root switch, and the switch priority of a VLAN. For more information, see the
and the
If your network consists of switches that do not support the extended system ID and switches that do
support it, it is unlikely that the switch with the extended system ID support will become the root switch.
The extended system ID increases the switch priority value every time the VLAN number is greater than
the priority of the connected switches running older software.
78-11381-05
spanning-tree extend system-id
Modification
This command was first introduced.
"spanning-tree vlan"
sections.
spanning-tree extend system-id
Catalyst 2950 Desktop Switch Command Reference
"spanning-tree mst root"
2-249

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents