Cisco Catalyst 2950 Command Reference Manual page 64

deny (access-list configuration)
This is an example of a standard ACL that sets a deny condition:
ip access-list standard Acclist1
deny 192.5.34.0
deny 128.88.10.0
deny 36.1.1.0
In these examples, all other IP access is implicitly denied.
Note
You can verify your settings by entering the show ip access-lists or show access-lists privileged EXEC
command.
Related Commands Command
ip access-list
permit (access-list
configuration)
ip access-group
show ip access-lists
show access-lists
Catalyst 2950 Desktop Switch Command Reference
2-40
0.0.0.255
0.0.0.255
0.0.0.255
Description
Defines an IP ACL.
Sets conditions for an IP ACL.
Controls access to an interface.
Displays IP ACLs configured on the switch.
Displays ACLs configured on a switch.
Chapter 2 Cisco IOS Commands
78-11381-05