Cisco Catalyst 2950 Command Reference Manual page 112

mac address-table notification
Examples
This example shows how to enable the MAC notification feature:
Switch(config)# mac address-table notification
This example shows how to set the notification-trap interval to 60 seconds:
Switch(config)# mac address-table notification interval 60
This example shows how to set the number of entries in the history table to 32:
Switch(config)# mac address-table notification history-size 32
You can verify your settings by entering the show mac address-table notification privileged EXEC
command.
Related Commands Command
clear mac address-table
show mac address-table notification
snmp-server enable traps
snmp trap mac-notification
Catalyst 2950 Desktop Switch Command Reference
2-88
Description
notification Clears the MAC address notification global counters.
Displays the MAC address notification settings for all
interfaces or the specified interface.
Sends the SNMP MAC notification traps when the
mac-notification keyword is appended.
Enables the SNMP MAC notification trap on a specific
interface.
Chapter 2 Cisco IOS Commands
78-11381-05