Cisco Catalyst 2950 Command Reference Manual page 217

Chapter 2 Cisco IOS Commands
This is an example of output from the show mvr interface gigabitethernet0/2 command:
Switch# show mvr interface gigabitethernet0/2
Type: RECEIVER Status: ACTIVE Immediate Leave: DISABLED
This is an example of output from the show mvr interface fastethernet0/6 member command:
Switch# show mvr interface fastethernet0/6 member
239.255.0.0
239.255.0.1
239.255.0.2
239.255.0.3
239.255.0.4
239.255.0.5
239.255.0.6
239.255.0.7
239.255.0.8
239.255.0.9
Related Commands Command
mvr
mvr type
show mvr
show mvr members
78-11381-05
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
Description
Enables and configures multicast VLAN registration on the
switch.
Configures an MVR port as a receiver or a source port.
Displays the global MVR configuration on the switch.
Displays all receiver ports that are members of an MVR
multicast group.
Catalyst 2950 Desktop Switch Command Reference
show mvr interface
2-193