Cisco Catalyst 2950 Command Reference Manual page 118

mls qos cos
This example shows how to assign all the packets entering a port to the default port CoS value of 4:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# mls qos cos 4
Switch(config-if)# mls qos cos override
You can verify your settings by entering the show mls qos interface privileged EXEC command.
Related Commands Command
mls qos map
mls qos trust
show mls qos interface
Catalyst 2950 Desktop Switch Command Reference
2-94
Description
Defines the CoS-to-DSCP map or the DSCP-to-CoS map.
Configures the port trust state.
Displays quality of service (QoS) information.
Chapter 2 Cisco IOS Commands
78-11381-05