Show Vlan - Cisco Catalyst 2950 Command Reference Manual

show vlan

show vlan
Use the show vlan user EXEC command to display the parameters for all configured VLANs or one
VLAN (if the VLAN ID or name is specified) on the switch.
brief
Syntax Description
id vlan-id
name vlan-name
remote-span
summary
| begin
| exclude
| include
expression
Though visible in the command-line help string when the EI is installed, the internal usage, ifindex,
Note
and private-vlan keywords are not supported.
Command Modes User EXEC
Command History Release
12.0(5.2)WC(1)
12.1(9)EA1
12.1(11)EA1
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Catalyst 2950 Desktop Switch Command Reference
2-220
show vlan [brief | id vlan-id | name vlan-name | remote-span | summary] [ | {begin | exclude |
include} expression]
(Optional) Display one line for each VLAN with the VLAN name, status,
and its ports.
(Optional) Display information about a single VLAN identified by VLAN ID
number. For vlan-id, the range is 1 to 4094 when the enhanced software
image (EI) is installed and 1 to 1005 when the standard software image (SI)
is installed. Do not enter leading zeros.
(Optional) Display information about a single VLAN identified by VLAN
name. The VLAN name is an ASCII string from 1 to 32 characters.
(Optional) Display information about Remote SPAN (RSPAN) VLANs.
(Optional) Display VLAN summary information. This keyword is available
only if your switch is running the EI.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was first introduced.
The summary keyword was added.
The remote-span keyword was added.
Chapter 2 Cisco IOS Commands
78-11381-05