Using - Cisco SPA301 Administration Manual

Provisioning
Using TR-069
Using TR-069
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
To configure general purpose parameters, navigate to Admin Login > advanced >
Voice > Provisioning.
TR-069 (Technical Report 069) provides Service Providers with a common
platform to manage all voice devices and other customer-premises equipment
(CPE) in large-scale deployments, no matter neither the device type nor the
manufacturer.
As a bidirectional SOAP/HTTP-based protocol, it provides the communication
between customer-premises equipment (CPE) and Auto Configuration Servers
(ACS). It includes both a safe auto configuration and the control of other CPE
management functions within an integrated framework. The protocol allows the
automatic configuration of Internet access devices, such as modems, routers,
gateways, set-top box, and VoIP-phones. The technical specifications are
managed and published by the Broadband Forum.
Cisco IP phones can be managed by using the protocols and standards defined in
TR-069. The ACS enables bulk configuration changes and firmware updates for
CPEs (IP phones). TR-069 inter operates with any ACS that will inter operate with a
MOTIVE client.
To configure the TR-069 client, navigate to Admin Login > advanced > Voice >
TR-069:
Field
Enable TR-069
ACS URL
ACS Username
Description
From the drop-down menu, select yes to enable TR-069. or
no to disable TR-069.
Enter the URL of the ACS using the CPE WAN Management
Protocol. This parameter must be in the form of a valid HTTP
or HTTPS URL. The host portion of this URL is used by the
CPE to validate the ACS certificate when using SSL or TLS.
Enter the username that authenticates the CPE to the ACS
by using the CPE WAN Management Protocol. This
username is used only for HTTP-based authentication of the
CPE.
6
188