Cisco SPA301 Administration Manual page 136

Configuring SIP, SPCP, and NAT
Configuring SIP
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
Voice Quality Report
Address
Description
The name of the collector that collects the statistics from
SIP PUBLISH events. For example, collector@
qualified-domain-name
collector IP address
@ -
event package, SIP PUBLISH, enables the collection and
reporting of metrics that measure the quality for VoIP
sessions. Voice call quality information derived from
RTCP-XR and call information from SIP is conveyed from
a User Agent in a session to the third party in SIP
PUBLISH method.
RTCP-XR must be configured first (see
Parameters). After RTCP-XR is enabled, the call status
information is updated on the Voice > Info page during an
active call. Additionally, RTCP-XR packets containing a
voice metrics block report are sent with the interval
specified in the RTCP Tx Interval. When the call session is
ended, a SIP PUBLISH with voice metrics info is sent to
the collector endpoint.
This parameter supports a full SIP URI. Examples of valid
addresses:
• collector@domain.com
• 123.collect@123. 1 23. 1 23. 1 23:5555
• 5678@domain.com:5656
For example if extension 1 was configured by using the
phone profile:
<Voice_Quality_Report_Address_1_ ua="na">
collector@domain.com
</Voice_Quality_Report_Address_1_>
or
<Voice_Quality_Report_Address_1_ ua="na">
123.collect@123.123.123.123:5555
</Voice_Quality_Report_Address_1_>
or
<Voice_Quality_Report_Address_1_ ua="na">
5678@domain.com:5656
</Voice_Quality_Report_Address_1_>
(collector@reports.cisco.com) or
(collector@192. 1 68.5. 1 ). The SIP
Configuring RTP
4
fully-
136