Cisco SPA301 Administration Manual page 256

Cisco SPA IP Phone Field Reference
SIP Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
Escape Display Name
Escape Special Character
SIP-B Enable
Talk Package
Hold Package
Conference Package
Notify Conference
Description
Lets you keep the Display Name private. Select
yes if you want the IP phone to enclose the string
(configured in the Display Name) in a pair of
double quotes for outbound SIP messages. Any
occurrences of or \ in the string is escaped with \
and \\ inside the pair of double quotes. Otherwise,
select no.
Defaults to yes.
Normally, the IP phone sends a "%23" (escape) as
part of the message when the special character #
is included in the SIP INVITE message. This can
cause problem s with some telephony servers
that need to receive the # character. When this
parameter is set to yes, the phone sends a "%23"
(escape) as part of the message when the # is
included. When set to no, the # is sent directly and
the escape (%23) is not used.
Defaults to yes.
Enables SIP for Business (supports Sylantro call
flows) call features.
Enables support for the BroadSoft Talk Package,
which enables a user to answer or resume a call
by clicking a button in an external application.
Enables support for the BroadSoft Hold Package,
which enables a user to place a call on hold by
clicking a button in an external application.
Enables support for the BroadSoft Conference
Package, which enables a user to start a
conference by clicking a button in an external
application.
If enabled, the unit will send out a NOTIFY with
event=conference when starting a conference.
A
256