Cisco SPA301 Administration Manual page 277

Cisco SPA IP Phone Field Reference
Regional Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
Page Tone
Alert Tone
System Beep
Call Pickup Tone
Description
Specifies the tone transmitted when the paging
feature is enabled.
Defaults to 600@-16;.3(.05/0.05/1).
Played when an alert occurs.
Defaults to 600@-19;.2(.05/0.05/1).
Audible notification tone played when a system
error occurs.
Defaults to 600@-16;. 1 (.05/0.05/1).
Cisco SPA525G or
NOTE Applies to
Cisco SPA525G2 Cisco WIP310 only
or
This field provides the ability to configure an
audio indication for call pickup. The call pickup
tone is the tone to play when the BLF button is
configured and there is an incoming alert on the
button. The default value for this parameter is
440@-10;30(.3/9.7/1), which is the same as the call
waiting tone.
This feature appears as follows in the phone
configuration file:
<Call_Pickup_Tone ua="na">440@-10;30(.3/9.7/
1)</Call_Pickup_Tone>
A
.
277