Accessing Administrative Options; Using The Web Administration Tabs; Viewing Phone Information; Viewing Reboot Reasons - Cisco SPA301 Administration Manual

Getting Started

Viewing Phone Information

Viewing Phone Information
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide

Accessing Administrative Options

To access administrative options, either:
• Log in to the configuration utility, then click Admin Login.
• Enter the IP address of the phone in a Web browser and include the admin/
extension. For example: http://192. 1 68. 1 .220/admin/

Using the Web Administration Tabs

Each tab contains parameters related to that feature. Some tasks require that you
set multiple parameters in different tabs.
Appendix A, "Cisco SPA IP Phone Field Reference,"
parameter available on the phone web user interface.
You can check the current status of the Cisco SPA IP phones by clicking the Info
tab. The Info tab shows information about all phone extensions, including phone
statistics and the registration status.

Viewing Reboot Reasons

The phone stores the most recent five reasons the phone was refreshed or
rebooted. When the phone is reset to factory defaults, this information is deleted.
The list describes the reboot and refresh reasons (Cisco SPA300 Series and
Cisco SPA500 Series IP phones).
Reason
DHCP Failed
Upgrade
Description
The reboot was the result of a DHCP error caused
when the lease expired, or when the renewal or
verification failed.
The reboot was a result of an upgrade operation
(regardless whether the upgrade completed or
failed).
1
briefly describes each
27