User Tab; Call Forward; Speed Dial - Cisco SPA301 Administration Manual

Cisco SPA IP Phone Field Reference

User Tab

User Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
This section describes the fields for the User tab.

Call Forward

Parameter
Cfwd Setting
Cfwd All Dest
Cfwd Busy Dest
Cfwd No Ans Dest
Cfwd No Ans Delay
See Vertical Service Activation Codes
parameters.

Speed Dial

You can configure speed dials on the
Series IP phones. Speed dial configuration is on a separate tab on the
Cisco SPA525G or Cisco SPA525G2. It is not configurable from the phone web
user interface on the Cisco WIP310. Speed dial configuration for the
Cisco WIP310 is done on the IP phone screen.
Speed Dial 2 through 9: Target phone number (or URL) assigned to speed dial 2, 3,
4, 5, 6, 7, 8, or 9.
Defaults to blank.
Description
The overall control to turn on all forward functions.
Defaults to yes.
Enter the extensions to forward calls to.
Enter the extensions to forward calls to when the
line is busy.
Defaults to voice mail.
Enter the extension to forward calls to when the
call is not answered.
Defaults to voice mail.
Enter the time delay in seconds to wait before
forwarding a call that is not answered.
Defaults to 20 seconds.
for more information on call forwarding
Cisco SPA300 Series
A
and Cisco SPA500
350