Cisco SPA301 Administration Manual page 355

Cisco SPA IP Phone Field Reference
User Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Bluetooth Volume
Electronic
HookSwitch
Control (EHC) -
(SPA525G/
SPA525G2)
EHS Type
(SPA51X)
Speakerphone
Enable
Volume of the Bluetooth device.
NOTE Applies to the Cisco SPA525G or Cisco SPA525G2
only.
Some headsets enable you to answer and end phone
calls by using controls located on the headset. Set this
parameter to yes if the user is using a headset with a
control function. This feature has been tested with
Plantronics base/headsets (that require adapter APC45):
• Savi W7xx series (Savi W710, W720, W730,
W740, and W745)
• CS5xx series (CS 540, CS 510, and CS520)
The default setting is no.
Enables or disables the speakerphone. If the parameter
is set to yes (the default setting), the speakerphone is
enabled. If the parameter is set to no, the speakerphone
is disabled, and pressing the Speakerphone button on
the phone sends the audio to the phone handset instead
of the speaker.
A
355