Attendant Key Led Patterns - Cisco SPA301 Administration Manual

Cisco SPA IP Phone Field Reference
Attendant Console Tab (Cisco SPA500 and Cisco SPA500DS)
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
BXfer to Starcode Enable
BXfer on Speed Dial
Enable
Unit 1/2 Key 1-32
(SPA500S)
Unit 1/2 Key 1-30
(SPA500DS)

Attendant Key LED Patterns

The configuration for the attendant key LED patterns is the same as the line key
LED script described in
Parameter
Application LED
Serv Subscribe Failed LED
Serv Subscribing LED
SNRM Day Mode LED
Description
When set to yes, the phone performs a blind
transfer when the *code is defined in a speed dial
extended function,. If set to no, the current call is
held and a new call is started to the speed dial
destination.
When set to yes, the phone performs a blind
transfer when the speed dial function key is
selected. When set to no, the current connected
call is held and a new call to the speed dial
destination is started.
For example, when a user parks a call using the
speed dial function, if the parameter is enabled, a
blind transfer is performed to the parking lot. If the
parameter is not enabled, an attended transfer is
performed to the parking lot.
Enter a strings that define the extension and other
parameters associated with each lighted button
on the first Cisco Attendant Console. Keywords
and values are
Chapter 9, "Configuring LED Patterns."
Description
Extended applications (for example, speed dial,
xml, mp3, weather, news) are ready for use.
BLF service subscription failed.
BLF service subscription is on proceeding.
(Used with Cisco UC320W.) The System Night
Ringing Mode (SNRM) is turned off. The system is
in day mode.
case-sensitive.
A
361