Table 4-44 Signal Clamp Prompts - Honeywell VRX180 User Manual

Signal Clamp
If input is between Low Select and High Select, the output CVn OV equals the input. If the input exceeds
these two limits, the output equals the preset value.
Table 4-44 describes the Signal Clamp prompts. See Table 4-2 for additional prompts.
Prompt
OUT LOW LIMIT
OUT HIGH LIMIT
LOW SELECT
HIGH SELECT
INPUT
PRESET

Table 4-44 Signal Clamp Prompts

Range/Selections
OFF or number
OFF, analog parameter,
number
OFF, analog parameter,
number.
OFF, analog parameter,
number
OFF, analog parameter,
number.
Video Recorder – User Manual
Programming Function Blocks and Features
Definition
Displayed output value will be clamped and will flash
when these limits are exceeded.
If input goes below this number, the output will equal the
preset value. Otherwise, the output equals the input.
If input goes above this number, the output will equal the
preset value. Otherwise, the output equals the input.
Input to be clamped.
Output will go to this value when the input exceeds the
low or high select values.
137