4.9 Program Analog Outputs
The analog outputs will be accessible if an analog output board is detected upon power up.
If the instrument will be used for control, program the loops first. See Program Control Loops in Section
4.8.
Select an analog output to program.
Analog output type
Select the output type from Table 4-11.
Type as displayed
Table 4-12 shows the prompts for each type of Analog Output.
Table 4-13 describes each prompt.
Table 4-11 Analog Output Types
CAT
Current Adjusting Type (Current output)
DAT
Duration Adjusting Type (Time proportioning output)
Table 4-12 Prompts For Analog Output Types
CAT
IN DECIMAL POS
OUT DECIMAL POS
INPUT SOURCE
IN LOW LIMIT
IN HIGH LIMIT
OUT LOW LIMIT
OUT HIGH LIMIT
INC SLEW LIMIT
DEC SLEW LIMIT
FAILSAFE
FAILSAFE VALUE
Video Recorder – User Manual
Programming Function Blocks and Features
Full name of output type
DAT
IN DECIMAL POS
INPUT SOURCE
INC SLEW LIMIT
DEC SLEW LIMIT
IMPULSE TIME
MIN ON TIME
MIN OFF TIME
FAILSAFE
FAILSAFE VALUE
OUTPUT RELAY
101