Record Table Search; Figure 4-15 Record Table Search Screens - Honeywell HRXDS16D1T User Manual

Operation
4.

Record Table Search

Standard View
Expanded View
1.
Document 800-04559 Rev D
11/09
Note The lower number of the Segment indicates the latest recorded
video.
After you have set the date and time you want to search, highlight GO, then press
#. The selected date and time will display. Use the PLAY/PAUSE, RW, FF, Jog and
Shuttle to review the surrounding video.
Note If no recorded image displays on the current screen, press the
DISPLAY button and change the screen mode to 4x4. Now you
should see the cameras that recorded video during target time.
Figure 4-15
Recording information about video images currently displayed on the screen
displays on the recording status bar. A white vertical line indicates the current
search position. To search specific video, move the vertical line by using the Left
or Right arrow buttons on the front panel or by clicking the mouse on the desired
segment.
If the DVR's time and date have been reset to a time that is earlier than some
recorded video, it is possible for the DVR to have more than one video stream in
the same time range. In this case, the overlapping time range in the record table
will be separated by a yellow vertical line.
Record Table Search Screens
119