Record Table; Figure 4-13 Record Table Search (Standard View) Window; Figure 4-14 Record Table Search (Expanded View) Window - Honeywell HRSD40F User Manual

Operation

Record Table

The record status bar displays recording information about the recorded video that is
currently displayed on the screen. Using the record table, you can view video from all
camera channels or from specific camera channels.
Select Record Table Search... from the Search menu. The Record Table Search
window appears.
A white vertical line indicates the current search position. You can scroll behind or
ahead in the recorded video timeline. To search specific video, move the vertical line by
using the Left or Right arrow buttons on the front panel or by clicking the mouse on the
desired segment.
Document 800-03097 Rev C
03/09
Note If no video was recorded during the selected time, a message
appears alerting you that no image was recorded at that time.)
After you have found the clip, use
that was recorded before and after your selected video.
Figure 4-13
Click to switch to Expanded View
Figure 4-14
Click to switch to Standard View
and the arrow buttons to view the video
Record Table Search (Standard View) Window
Current search position
Record Table Search (Expanded View) Window
Current search position
119