Table of Contents
Advertisement
Setpoint Profiles Menu (in Online mode)
This menu lets you define profile ramp and soak segments and associated parameters, and store and
load programs to and from floppy disk or memory. See Figure 5-13 for allowable and non-allowable
storage.
To access the Setpoint Profiles menu:
1.
Press the Menu button until a main menu is displayed.
2.
Select Set Mode and change the mode to Online.
3.
Select Setpoint Profiles.
4.
Select a profile (#1 through #4) to program.
Table 5-5
Table 5-4,
Prompt
EDIT PROFILE #1
EDIT PROFILE #2
EDIT PROFILE #3
EDIT PROFILE #4
STORE PROGRAM TO
DISK
STORE PROGRAM TO
MEMORY
Table 5-6
,
and describe the Setpoint Profile prompts.
Table 5-4 Setpoint Profiles Prompts
Range/Selections
STARTING PROFILE #
NUMBER OF PROFILES
FILE
FILES ON DISK
PROGRAM NUMBER
STORE PROGRAM TO MEMORY
Video Recorder – User Manual
Definition
Select a profile to edit. See Table 5-5 for
prompts.
Select 1-4.
Select the lowest numbered profile to be
stored; that is, Profile 1, 2, 3, or 4. See How
programs are stored on a disk on page 200
for details.
Select 1-4.
Number of profiles (1, 2, 3, or 4) determines
how many profiles will be stored, starting with
the Starting Profile #. For example, if Starting
Profile # is 1 and Number of profiles is 3,
then Profiles 1, 2, and 3 are stored. See How
programs are stored on a disk on page 200
for details.
Select the filename and number. Filename
extension is .LNS. After you select the
number and press Enter, the profile(s) are
stored to disk.
Lists all files on the disk.
Select 1-12.
There are up to 96 "slots" allotted for profile
memory storage. Depending on how many
profiles your instrument has, each program
will contain a certain number of profiles. See
How programs are stored to memory on page
198 for details.
Select this to store program to memory.
Setpoint Profiler
191
Advertisement
Table of Contents
