Table 5-1 Example Of Segment Events; Figure 5-8 Activating Events In Mid-Segment - Honeywell VRX180 User Manual

Segment Events
Each segment contains 16 programmable discrete event outputs whose ON/OFF states- specified by
you -can be used to trigger other discrete functions. The segment's event states are activated at the
beginning of the segment and are maintained unless changed by the next segment in the profile. See
Table 5-1
. The last segment's event states are maintained after the profiler is ended.
Event 1 State
Event 2 State
Event 3 State
To activate events in the middle of a ramp segment, replace the desired segment with 3 segments: a
ramp, a very short soak, and another ramp. Program the second and third segment events as if they
were the middle of the segment.

Table 5-1 Example of Segment Events

Segment #1
1 (ON)
0 (OFF)
1 (ON)
To activate events here
Program this:

Figure 5-8 Activating Events In Mid-Segment

Video Recorder – User Manual
Segment #2
0 (OFF)
1 (ON)
0 (OFF)
Ramp segment
Same events as short soak
Short soak segment
with desired events
Ramp segment
Program both ramps with same slope.
Setpoint Profiler
Segment #3
0 (OFF)
0 (OFF)
1 (ON)
183