Table of Contents
Advertisement
4.3 The Program mode menu
Program mode is an off-line mode for programming (configuring) the instrument. In this mode, all
outputs are frozen.
Table 4-1 shows the top level of the Program Mode menu with all available options. Your instrument
may have a reduced menu if options are not present or if features have been disabled.
SET MODE
LABELS
ANALOG INPUTS
CONTROL LOOPS
ANALOG OUTPUTS
DISCRETE INPUTS
DISCRETE OUTPUTS
CALCULATED VALUES
ALARMS
TOTALIZERS
PROFILERS
CONSTANTS
DISPLAYS
FEATURES
SECURITY
SERIAL COMMUNICATIONS
COPY BLOCK
CLOCK
LOAD/STORE CONFIG
SCAN RATE
LANGUAGE
Table 4-1 Program Mode Menu
Prompt
Video Recorder – User Manual
Programming Function Blocks and Features
Change operating mode of programmer
Enter descriptive labels for parameters using instrument's buttons
or a QWERTY keyboard or barcode reader.
Program Analog Inputs.
Program Control Loops.
Program Analog Outputs.
Program Discrete Inputs.
Program Discrete Outputs.
Program Calculated Values.
Program Alarms.
Program Totalizers.
Program Set point Profiles.
Program Constants.
Assign primary Online displays to the Display button.
Enable/disable certain menu items.
Enable/disable security on certain items.
Program Serial Communication.
Copy any function block to another channel.
Set time and date.
Store and load configurations/calibrations.
Set scan rate of instrument.
Select language of instrument.
Function
81
Advertisement
Table of Contents
