Making The Fault Relay Operational; Camera Signal Format - Honeywell rapid eye System Administrator Manual

Making the FAULT RELAY Operational

Fig. 8–5.
1. On the System tab, add a checkmark to: Enable Status Pulse or to it and Monitor Alarm Reporting.
See figure 8–5, above.
2. On the Events tab, click the Outputs subtab.
3. The name of Output 6 has changed to "System Status Pulse". You have the option of changing the
name, by typing in the box.
Fig. 8–6.

Camera Signal Format

NTSC / PAL. Signal type is a global setting for all cameras.
Document 800-02325 Rev A
07/08
Enabling the FAULT RELAY.
Enabling the FAULT RELAY Changes the Name of Output6.
System Administrator Guide
137