Table of Contents
Advertisement
7.1 Overview
Online operation involves interacting with displays and with menus. This section describes how to
interact with the online menus.
The Online Menu is accessed by pressing the Display button, then the Menu button. Or, you can
choose SET MODE from any menu to change the mode.
ATTENTION
Switching to the Online mode from the Program or Maintenance modes by pressing the Display button,
sometimes displays incorrect data for a few seconds before the display data is refreshed. You can avoid this
distraction by selecting ONLINE from the SET MODE menu instead.
The top level of the menu structure is shown in Table 7-1. Your unit may have a reduced menu if
options are not present or if features have been disabled through programming selections.
Menu as displayed
SET MODE
DATA STORAGE
ACCESS SUMMARIES
DATA ENTRY
SETPOINT PROFILES
TUNE LOOP
SET ANALOG OUTPUTS
REVIEW PROGRAMMING
7. Online Operation Using Menus
Table 7-1 Online Main Menu
Function
Change instrument's operating mode
Set up, operate and view the status of the data storage
Display status summaries
Adjust function values and states
Edit profile parameters. Store and load programs.
Enter loop tuning values. Pretune loop.
Adjust Analog Output values
View all programming (read only)
Video Recorder – User Manual
Online Operation Using Menus
221
Advertisement
Table of Contents
