Table of Contents
Advertisement
Introduction
Time Resolution
Module
Synchronization
Math Calculations
Constants
Alarms
Totalizers
Control Loops
Auto Tune
Primary Displays
Support Displays
Communications
(optional)
6
Table 1-1 Specifications (continued)
Time Proportional Outputs (TPO) on digital output
Equals the Scan Cycle time of the recorder.
Only Digital outputs 1 to 5 can be configured as DAT outputs.
Individual TPOs are not synchronized with others.
Performance/Capacities
Standard Math package includes: 24 Calculated Values along with the following Math
functions: Free Form Math, Math Operators (+, -, x, , Absolute Value, Square Root, Std.
Deviation), Free Form Logic, Logic Operators (AND, OR, XOR, Inverter, Flip Flop, One-
Shot), Inverter algorithms.
Advanced Math package includes: 64 Calculated Values with the functions from Standard
Math along with the following types of pre-packaged algorithms: Signal Select, Compare,
Signal Clamp, Periodic Timer, Interval Timer, Counter, Relative Humidity, Standard Splitter,
Scaling.
32
96
0, 4 or 48
Up to 8 (PID, ON/OFF, Cascade, Split, Ratio).
Each loop can be pre-tuned automatically to establish acceptable tuning parameters. On-
line fuzzy overshoot suppression.
Up to 10 displays may be assigned from the 32 formats selected among trend screens,
Bargraph screens, Panel screens, Summary screens, loop screens, Setpoint profiler
screens.
13 (menu access).
Type: RS-422/485, Modbus
Connection: 2 or 4 wire RS485.
Distance: 600 meters, (2000 feet).
Number of links: Up to 30
Baud Rate: 1200, 2400, 4800, 9600, 19.2K, 38.4K.
Parity: Selectable; odd, even, none.
Video recorder – User Manual
RTU protocol
Advertisement
Table of Contents
