Popup Menu; No Signal; No Permission - Honeywell H.264 HRDP User Manual

Popup Menu

No Signal

No Permission

______________________________________________________________________________________________
Document 800-06801 Rev B
06/10
Right-click the live screen to open the Popup Menu.
HIDE LIVE VIEW – Hide the
selected camera from Live view.
RECORD CHANGE – Change the
recording settings for that channel
including PPS, quality, resolution
and event response.
PAGE SEQUENCE –the SEQ icon
is shown on the bottom right of the
screen and displayed channels will
be sequentially changed.
FREEZE ALL – Pause all channels
displayed on-screen.
SHOW MOTION AREA – Display
the motion grid for the selected
camera.
DISPLAY-PIP – Change screen
display to PIP.
VIDEO LOSS BUZZER – Select to
activate the internal buzzer when a
camera stops transmitting video.
SEARCH – Open the Search Menu.
PTZ – Switch to PTZ mode.
MENU – Open the Setup Menu.
If no camera is connected to a channel, NO SIGNAL is shown on the display
screen. When a camera is disconnected, the DVR will generate a warning
sound according to the system settings.
The Administrator can set different levels of authorization for each user. If a
user is not allowed to view a certain live or playback channel, a NO
PERMISSION warning is shown on the display screen.
Performance Series DVR User Guide
61