Honeywell MC ToolKit User Manual page 93

Dialog Field
Monitor Output (mA)
Output (%)
PV
SV
TV
QV
Comm. Status
Device Status
Calibration Zero Trim
Apply Values
Loop Test
D/A Trim
Apply Values, Set the (output current to)
screen 1
Apply Values, Current Applied Process
screen 2 Value
Set As New Value
Read New Value
Loop Test Mode
Choose Analog Output
Level
Other
Set Output
Clear Output
D/A Trim Field Device Will Be
Scaled From
Change Scale
Start D/A Trim
Meter Value
Burst Mode Burst Mode
Burst Options
Specific Number of Device
Monitor Variables to Query
Dev. Var. 1
Dev. Var. 2
Dev. Var. 3
Release 3
9/06
Value
Floating point
Floating point
Floating point
Floating point
Floating point
Floating point
String value
Displays the Device Status screen
Performs a Zero Trim
Displays the Apply Values screen
Displays the Loop Test screen
Displays the D/A Trim screen
4 mA
Floating point
Sets the LRV or URV equal to the value in the Current Applied
Process Value edit box.
Updates the Current Applied Process Value edit box
Normal
4 mA
Floating point
Sets the device output
Clears the Output Mode
Floating Point
Activates the 2 edit boxes mentioned above.
Starts the D/A Trim process
Floating point
Off
On
PV
1 - 4
0 - 22
0 - 22
0 - 22
34-ST-25-20 MC Toolkit User Manual
20 mA
Output Mode
20 mA Other
Not Used Unknown
None Special
% Range and All PVs and
Current Current
Reference Data
85