Table 9 Hart Device Upload Procedure - Honeywell MC ToolKit User Manual

Procedural Considerations

Table 9 HART Device UPLOAD Procedure

Initiate (Refer to Figure 8.)
Connection
Device
Polling and
Selection
When the POLL button is
selected, the MC toolkit
will look for devices on all
addresses (0-15), and will
then list the addresses of all
transmitters that respond.
Note that at this point, the
UPLOAD
intensity (inactive).
Page 42
HART Device UPLOAD Procedure
Select the
button; this display
appears.
If you know the address of
the device on the HART
network, select it in the
Address drop-down box.
If you don't know the
address of the device, select
the POLL button.
The MC toolkit will look
for devices on all addresses
(0-15), and will then list the
addresses of all transmitters
that respond.
button is half
34-ST-25-20 MC Toolkit User Manual
Select the
HART Device
initiate communications.
- or -
Select the device from the
list.
button to
OK
Release 3
9/06