Honeywell MC ToolKit User Manual page 53

Basic
Setup
Transfer Function - Linear or Square Root
(select)
SV Units - Engineering Units for
Secondary Variable (select)
LRL - Lower Range Limit; URL - Upper Range Limit (read)
LRV - Lower Range Value ; URV - Upper Range Value (enter or read)
PV Sensor Units (r/w) - Engineering Units (select)
Damping - Filtering factor for process "noise" (in seconds - select)
PV Output (r)
Output
Condition
PV2 (r) (STT25T Only)
Alarm Direction - Failsafe
(
Upscale | Downscale)
jumpered or switched in
device)
field
Scaled D/A Trim
Table 16 for more
information.)
(STT25H,
NAMUR
STT25T)– Select output
levels:
Standard
Release 3
9/06
Honeywell HART Main Menu Procedures
Honeywell ST 3000
- (Refer to
or
NAMUR
34-ST-25-20 MC Toolkit User Manual
MC Toolkit Software with Honeywell HART Transmitters
Honeywell STT25H
CJT Units - Engineering Units for Cold
Junction Temperature (select)
PV1 and PV2 Sensor Units (r/w) -
Engineering Units
HART Output
Poll Address
To change the Poll Address
(0-15) of the connected
device:
• Select the desired address
from the pull-down list
• Select the
Req. Preambles
of preambles required
button.
Send
- Number
45