Reference Data; Table 25 Glossary - Honeywell MC ToolKit User Manual

Table 25 Glossary

Item Definition
Conformity Response form of
sensor.
D/A Trim Digital to Analog
Trim
Damping
EU Engineering
Units
Input
Local Meter
Loop Test
LRL Lower Range
Limit
LRV Lower Range
Value
Match PV's Toggle for PV
Matching
Meter Units
Output
PV Process Variable
PV Input
PV Units Process Variable
Units
Release 3
9/06

Reference Data

User selection of PV conversion algorithm: Linear or Square Root
Adjustment to digital-to analog (output) conversion algorithm that
aligns minimum and maximum values of scaled digital range to
minimum (0%) and maximum (100%) values of analog output.
Digital algorithm in transmitter MPU that reduces noise in a PV that
is generated in the process or induced in transmitter components.
A standard scale of values, selected by the user from a standard set for
convenient display and interpretation.
1. Physical property (e.g., pressure) applied to a sensor
2. Digital value, calculated in the transmitter, that represents
magnitude of the physical input
A device associated with a single transmitter and installed locally (in
the transmitter housing) or remotely (in a separate housing) that
displays variables sensed or calculated in the transmitter.
(In Analog Mode only) a set of commands from the HHC that causes
the transmitter to provide 0% (4 mA) and 100% (20 mA) for testing
proper operation of all components of the current loop.
Minimum value in the useful range of the physical property of a
transmitter at which a sensor can operate.
Minimum value in a continuous range of "normal" process values.
When On, the value of PV2 is set to the value of PV1.
User-selected scale of values that provides for convenient
interpretation of values in the associated transmitter.
Analog or digital value, calculated from the input, that is transferred
from the transmitter to a receiver (e.g., process control equipment)
Measured magnitude of a primary physical property such as pressure
or temperature.
Physical property such as pressure or temperature, applied to an input
sensor
Standard scale of values of a PV, selected by the user for convenient
display and interpretation.
34-ST-25-20 MC Toolkit User Manual
Description
75