About Disconnect Cause Types - Cisco TelePresence System Codec C20 Reference Manual

Cisco TelePresence System Codec C20
Contents Introduction

About disconnect cause types

The following parameters are logged when a call is
disconnected. The disconnect cause types are used in
disconnect events (xEvent) and also logged in xHistory
CallLogs.
Codec C20 API Reference Guide TC7.0, JANUARY 2014.
D14869.11
About the API xConfiguration
CauseValue Proprietary. We recomend the use of CauseType and CauseCode.
CauseType Describes why the call was disconnected. The value space is { OtherLocal, LocalDisconnect,
UnknownRemoteSite, LocalBusy, LocalReject, InsufficientSecurity, OtherRemote, RemoteDisconnect,
RemoteBusy, RemoteRejected, RemoteNoAnswer, CallForwarded, NetworkRejected }
CauseString Describes the Cause Code.
CauseCode The disconnect Cause Codes are defined in SIP and Q.850.
CauseOrigin SIP, Q.850, internal.
Example 1:
xHistory CallLogs Call 694
...
*h xHistory CallLogs Call 694 DisconnectCauseValue: 2
*h xHistory CallLogs Call 694 DisconnectCause: "Normal"
*h xHistory CallLogs Call 694 DisconnectCauseType: RemoteDisconnect
*h xHistory CallLogs Call 694 DisconnectCauseCode: 16
*h xHistory CallLogs Call 694 DisconnectCauseOrigin: Q850
...
** end
Example 2:
xEvent DisconnectEvent
*e CallDisconnect CauseValue: 1
CauseType: "LocalDisconnect"
CauseString: ""
OrigCallDirection: "outgoing"
RemoteURI: "firstname.lastname@company.com"
CallId: 89
CauseCode: 0
CauseOrigin: SIP
** end
194
xCommand xStatus
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
API Reference Guide
Appendices Appendices