Cisco TelePresence System Codec C20 Reference Manual page 53

Cisco TelePresence System Codec C20
Contents Introduction
xConfiguration Security Session ShowLastLogon
When logging in to the system using SSH or Telnet you will see the UserId, time and date of the last
session that did a successful login.
Requires user role: ADMIN
Value space: <Off/On>
On: Show information about the last session.
Off: Do not show information about the last session.
Example: xConfiguration Security Session ShowLastLogon: Off
xConfiguration Security Session InactivityTimeout
Determine how long the system will accept inactivity from the user before he is automatically logged
out.
Requires user role: ADMIN
Value space: <0..10000>
Range: Select a value between 1 and 10000 seconds; or select 0 when inactivity should not
enforce automatic logout.
Example: xConfiguration Security Session InactivityTimeout: 0
Codec C20 API Reference Guide TC7.0, JANUARY 2014.
D14869.11
About the API xConfiguration xConfiguration
SerialPort configuration
xConfiguration SerialPort Mode
xConfiguration SerialPort BaudRate
xConfiguration SerialPort LoginRequired
53
xCommand
Enable/disable the serial port (connection via Camera port with Y-cable).
Requires user role: ADMIN
Value space: <Off/On>
Off: Disable the serial port.
On: Enable the serial port.
Example: xConfiguration SerialPort Mode: On
Specify the baud rate (data transmission rate, bits per second) for the serial port. The default value
is 38400.
Other connection parameters for the serial port are: Data bits: 8; Parity: None; Stop bits: 1; Flow
control: None.
Requires user role: ADMIN
Value space: <9600/19200/38400/57600/115200>
Range: Select a baud rate from the baud rates listed (bps).
Example: xConfiguration SerialPort BaudRate: 38400
Determine if login shall be required when connecting to the serial port.
Requires user role: ADMIN
Value space: <Off/On>
Off: The user can access the codec via the serial port without any login.
On: Login is required when connecting to the codec via the serial port.
Example: xConfiguration SerialPort LoginRequired: On
API Reference Guide
xStatus Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.