Cisco TelePresence System Codec C20 Reference Manual page 170

Cisco TelePresence System Codec C20
Contents Introduction
xStatus SIP Profile 1 Registration [n] Reason
Shows a message to explain the reason why the SIP registration failed.
Value space of the result returned:
<String>
Example:
xStatus SIP Profile 1 Registration 1 Reason
*s SIP Profile 1 Registration 1 Reason: "404 Not Found"
** end
xStatus SIP Profile 1 Registration [n] URI
Shows the URI used for registration to the SIP Proxy server.
Value space of the result returned:
<String>
Example:
xStatus SIP Profile 1 Registration 1 URI
*s SIP Profile 1 Registration 1 URI: "firstname.lastname@company.com"
** end
xStatus SIP Profile 1 DirectoryURI Primary URI
Returns the primary directory URI set for the endpoint in UCM. Directory URI is associated with a
directory number, and can be used to make calls and identify callers. Up to five directory URIs can
be set, but only one of them can be set as primary.
Value space of the result returned:
<String>
Example:
xStatus SIP Profile DirectoryURI Primary URI
*s SIP Profile 1 DirectoryURI Primary URI: "123456@company.com"
** end
Codec C20 API Reference Guide TC7.0, JANUARY 2014.
D14869.11
About the API xConfiguration
xStatus SIP Profile 1 DirectoryURI Primary URI
170
xCommand
Returns the primary directory URI set for the endpoint in UCM. Directory URI is associated with a
directory number, and can be used to make calls and identify callers. Up to five directory URIs can
be set, but only one of them can be set as primary.
Value space of the result returned:
<String>
Example:
xStatus SIP Profile DirectoryURI Primary URI
*s SIP Profile 1 DirectoryURI Primary URI: "123456@company.com"
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.